Quick Steps; Dishwasher Use - KitchenAid KDFE454CSS Instrucciones Para El Usuario

1
Prepare and load
dishwasher.
2
Add detergent
for cleaning and
rinse aid for
drying.
Prepare and Load the Dishwasher
IMPORTANT: Remove leftover food, bones, toothpicks and other
hard items from the dishes. Remove labels from containers before
washing.
10 place load - upper rack
12 place load - upper rack
6

Dishwasher Use

STEP 1
10 place load - lower rack
12 place load - lower rack

Quick Steps

3
Select a cycle and option.
4
Start dishwasher.
NOTE: If the Start/Resume button
is located on the top of door, push
door firmly closed within
3 seconds of pressing START/
RESUME.
Make sure nothing keeps spray arm(s) from
spinning freely. It is important for the water
spray to reach all soiled surfaces.
Make sure that when the dishwasher door is closed no items
are blocking the detergent dispenser.
Items should be loaded with soiled surfaces facing down and
inward to the spray as shown. This will improve cleaning and
drying results.
Avoid overlapping items like bowls or plates that may trap food.
Place plastics, small plates and glasses in the upper rack.
Wash only plastic items marked "dishwasher safe."
To avoid thumping/clattering noises during operation, load
dishes so they do not touch one another. Make sure lightweight
load items are secured in the racks.
Improper loading can cause dishes to be chipped or damaged.
When loading glasses or mugs, it is best to load these items in
between rows of tines instead of loading them over tines, as
shown.
When loading silverware, always place sharp
items pointing down. Mix items in each
section of the basket with some pointing up
and some down to avoid nesting. Spray
cannot reach nested items.