Router Setup; Internet Connection Settings - Steren COM-840 Guía Rápida

4. Router Setup

4.1. Internet Connection Settings

Most connections utilize a dynamic IP (DHCP) and the default is already set
to this. If you have another connection type (like static IP), you will need to
click on 'Convenient Setup' in the menu and input information given you by
your service provider and then click save.
You may already be connected to the Internet. Click on 'System
Information'- 'Internet access info' to see if you have an IP, Gateway, etc
(refer to the following picture). If not, your service provider probably requires
you clone the MAC address of your computer to the router. To do so, click
on 'Internet Setup' in the menu, then click on 'Clone MAC Address' button
to get your computer's MAC address and then click the 'Save' button below.
14