H.Koenig STM20 Manual De Utilización página 8

INSTALLATION BEFORE USE
1 Place the base horizontally on the table (see figure 1), the base also can be fixed to the wall with
screw or directly hang on the clothes rod (see figure 2).
Figure 1
2 Pick up the iron, press the middle of the water tank, the water tank will pop up automatically. Pull
out the seal on the back of water tank and inject distilled water until it full, then assemble the water
tank seal (Figure 3) and install the water tank into the base (see figure 4)
Tips:
a) When the base must hang on the wall, please be sure to fix it with the screws (screw &
related material, please buy it from the market), so as not to fall off and damage the
product.
b) When the Iron is stored in the base, it must be securely to prevent falling & damaging.
Figure 3
Hook
Figure 2
Clothes rod
Figure 4