H.Koenig STM20 Manual De Utilización página 9

1 Pace the iron into the base: The protruding part in the front of iron must be
inserted into the base slot. Then vertically press the handle of the iron, press the iron into the
base. So the iron is completely fastened by the base and will not fall off automatically (see figure
5)
Base Slot
Behind the buckle
Handle
Figure 5
Brush installation and removal method
1 Insert the brush into the iron in the direction indicated, and gently press the bottom button of the
brush until you hear a "click" (see figure 6).
Bottom button
Figure 6 Figure 7
2 Hold the iron, press the button at the bottom of the brush and remove it (see figure 7)
Tips
1 Before installing the accessories, please make sure the power is disconnected and the
plug must be removed from the socket. If you have used this product before, please install
it after cooling to avoid burns.
2 Before using the accessories, please check & make sure in good condition.