Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 2 Attach Wall Plate
CAUTION:
Avoid potential personal injuries and property damage!
●
Drywall covering the wall must not exceed 16 mm (5/8 in.)
●
Minimum wood stud size: common 51 x 102 mm (2 x 4 in.) nominal 38 x 89 mm (1 1/2 x 3 1/2 in.)
1.
Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2.
Position the wall plate template
3.
Drill pilot holes using a 5.5 mm (7/32 in.) diameter drill bit. Remove wall plate template
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 63.5 mm (2½ in.).
1
≤ 16 mm
(5/8 in.)
NOTE: For assistance in determining wall
plate location, see Height Finder at accents.sanus.com.
10
Wood Stud ONLY
13
at your desired height and line up the holes with your stud center line. Level the template and tape in place.
2
SA NU
S
AC CE NT
S
A SF 11
0
W AL L
PL AT E
TE M PL
AT E
13
.
NOTE: TV shifts 21.9 mm (7/8 in. {0.86 in.}) to the
right or left when in the home position. Consider this when
selecting the location of your wall mount.
3
13
63.5 mm
(2½ in.)
5.5 mm
(7/32 in.)
SA NU
S
AC CE NT
S
AS F1 10
WA LL
PL AT E
TE MP
LA TE
13
Publicidad
Tabla de contenido
