Kress Robotik MISSIONNANO KR100 Manual Del Propietário página 11

MissionNANO can be charged manually without
TM
the boundary wire.
1. Connect the charging base to a suitable power
supply. The green light on the charging base will
turn on.
2. Manually dock the MissionNANO
charging base while the MissionNANO
powered off.
3. The green light on the charging base will turn to
red. MissionNANO
TM
4
Winter Hibernation
Your MissionNANO will live longer and healthier if it is allowed to hibernate. So even though it is tough, we
TM
recommend storing your MissionNANO
Before you prepare your MissionNANO
• Thoroughly clean your MissionNANO
• Fully charge the battery
• Turn the power off
To maximize the battery life, fully charge the battery before storage during winter.
WARNING: Protect the underside of MissionNANO
upside down outdoors.
The boundary wire can be left in the ground although its ends should be protected, such as placed in a tin can
with grease. If the charging base is left outside for the winter, leave the boundary wire connected.
NOTE: When bringing the MissionNANO
and contact pins are clean. We recommend using a fine grade emery cloth to clean the contacts. Using the
app, make sure the date and time are correct and send MissionNANO
5
Replacing the battery
WARNING: Power off before attempting any adjustment, replacement or repair.Before
replacing the blades, turn your MissionNANO
If you need to replace the battery, follow these
steps:
1. Gently turn your MissionNANO
2. Remove the screws on the battery cover.
Remove the battery cover.
into the
TM
is
TM
will begin to charge.
in your shed or garage during the winter.
TM
for winter hibernation, we recommend you:
TM
TM
back to work after winter hibernation, make sure the charging strips
TM
upside down.
TM
from water. NEVER store MissionNANO
TM
back to what it loves doing: mowing.
TM
OFF and put on protective gloves.
TM
TM
11
EN