Mini Tower Computer - Back-Panel Connectors - Dell OptiPlex 210L Guía De Referencia Rápida

4 power connector
5 back-panel connectors Plug serial, USB, and other devices into the appropriate connector.
6 card slots
Mini Tower Computer — Back-Panel Connectors
1 parallel connector
2 link integrity light
3 network adapter
connector
4 network activity light
Insert the power cable into this connector.
Access connectors for any installed PCI and PCI Express cards.
1
10
9
Connect a parallel device, such as a printer, to the parallel connector. If you have a
USB printer, plug it into a USB connector.
NOTE:
The integrated parallel connector is automatically disabled if the computer
detects an installed card containing a parallel connector configured to the same
address. For more information, see your online User's Guide.
• Green — A good connection exists between a 10-Mbps network and the computer.
• Orange — A good connection exists between a 100-Mbps network and the
computer.
• Off — The computer is not detecting a physical connection to the network.
To attach your computer to a network or broadband device, connect one end of a
network cable to either a network jack or your network or broadband device.
Connect the other end of the network cable to the network adapter connector on
the back panel of your computer. A click indicates that the network cable has been
securely attached.
NOTE:
Do not plug a telephone cable into the network connector.
On computers with a network adapter card, use the connector on the card.
It is recommended that you use Category 5 wiring and connectors for your network.
If you must use Category 3 wiring, force the network speed to 10 Mbps to ensure
reliable operation.
This light flashes yellow when the computer is transmitting or receiving network
data. A high volume of network traffic may make this light appear to be in a steady
"on" state.
2 3 4
5
6
7
8
Quick Reference Guide
11