Installing The Belt Clip; Charging The Battery Pack - Insignia IN-FR10111 Guia Del Usuario

IN-FR10111.book Page 5 Saturday, January 29, 2005 2:56 PM
IN-FR10111 GMRS/FRS Radio

Installing the belt clip

To install the belt clip:
1 Slide the clip down into the slot on
the back of the radio until it clicks
into place.
2 To remove the belt clip, press the
lock tab down, then gently pull the
belt clip up toward the top of the
radio.

Charging the battery pack

Your Insignia radio is equipped for using a rechargeable NiMH battery pack,
which can be recharged using the desktop charger. Initial charge time is 24
hours with a charge time of 8-12 hours thereafter. For maximum battery life,
we recommend charging the battery pack when the low battery icon turns on.
Remove the radios from the charger when the charge time expires.
To charge using a desktop charger:
1 Install the rechargeable battery pack in the radio.
2 Connect the AC adapter into an AC power outlet.
3 Insert the AC adapter plug (or DC cigarette lighter adapter if charging in
vehicle) into the desktop charger jack.
4 Place the radio into the desktop charger slot. The LED indicator turns on,
showing that the battery is charging.
Notes: Use NiMH battery packs provided only by Insignia.
Do not attempt to charge alkaline batteries or any batteries or battery
packs other than those approved for use in your radio. Unapproved
batteries or battery packs may leak and damage your radio.
For long-term storage of the radio, turn the radio off and remove the
batteries from the radio.
www.Insignia-Products.com
Belt clip
lock tab
Belt clip
latch
5