Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Instruction Manual
For file reference, please record the following data:
Model No:_____________________________
Serial No:_____________________________
Installation Date:_______________________
Installation Location:____________________
When ordering replacement parts for your Drinking Water
Units or Accessory, please include the complete Model
Number and Serial Number of your unit.
English-Spanish
Reverse Osmosis
WTRO – 2
WTRO – 3
Publicidad
Resumen de contenidos para Tucson Water tec WTRO – 2
- Página 1 Instruction Manual English-Spanish Reverse Osmosis WTRO – 2 WTRO – 3 For file reference, please record the following data: Model No:_____________________________ Serial No:_____________________________ Installation Date:_______________________ Installation Location:____________________ When ordering replacement parts for your Drinking Water Units or Accessory, please include the complete Model Number and Serial Number of your unit.
- Página 2 Contents English Manual……………………..3 Spanish Manual…………………….9 Drawings……………………………16 Warranty…………………………….19...
-
Página 3: Installation Instructions
Reverse Osmosis Systems Your new drinking water system works on a process called Reverse Osmosis, in which water pressure is applied to a concentrated solution. Water is forced through a semi-permeable membrane from the concentrated side to the dilute side of the membrane. When water is passed through the membrane, dissolved particulate materials are left behind and are washed down the drain. - Página 4 SOLID COPPER RISER TUBE: Same procedure as flex tubing except you must cut a piece of the riser tube about 3/4” to 1” so the feed adaptor can fit between faucet and riser tube. 3. FAUCET The faucet should be positioned with aesthetics, function and convenience in mind.
- Página 5 STAINLESS STEEL SINK: Same as porcelain sinks. 4. DRAIN CLAMP CONNECTION Use black plastic drain clamp provided in the installation kit, which fits most standard drain sizes of 1-1/4”. Install drain clamp above the P-trap as close to the bottom of the basin as possible and drill a ¼” hole where the plastic fitting is to be installed.
- Página 6 How to change the Filter Cartridge Please Read Through Each Step Before Beginning STEP 1 Turn off the feed water valve to the RO system. Turn off Valve on the storage tank. Open RO faucet an allow all pressure to bleed off. (Allow a few minutes for the system to drain completely).
- Página 7 Recommended Sanitizing Procedures 1. Turn off feed water. 2. Drain storage tank by opening RO faucet. 3. Remove all membranes and filters. 4. Put 3 tablespoons of chlorine in prefilter housing. 5. Secure all housings to avoid leaks. Turn on feed water. 6.
-
Página 8: Troubleshooting Guide
Troubleshooting Guide SYMPTOMS PROBABLE CAUSE SOLUTION NO WATER Tank improperly pressurized Set empty tank pressure at 5-7 Water Supply turned off Turn on water supply Low water pressure (40 psi min.) Contact dealer for assistance Prefilter clogged Replace pre-filter Membrane damaged or clogged Replace membrane Product line crimped Replace line... -
Página 9: Sistemas De Osmosis Inversa
Sistemas de Osmosis Inversa Su nuevo sistema para purificar agua cuenta con el proceso llamado Osmosis Inversa, el cual consiste en la utilización de la presión de agua sobre una membrana semipermeable donde las particulas disueltas en el agua se quedan en la membrana dejando pasar solamente el agua sin las impurezas. - Página 10 LINEA FLEXIBLE: Desconecte la linea flexible del sink. Cuidadosamente mueva o gire el tubo hacia arriba para que el adaptador de alimentacion ajuste sobre la entrada de la llave del sink. Reemplaze la arandela de cono con la nueva arandela provista en el kit de instalación en la línea de agua fria. Instale el tubo sobre el adaptador de alimentacion y apriete.
- Página 11 4. CONEXION DEL SUJETADOR DE DESAGUE Utilize el sujetador negro de plástico standard proporcionado en el kit de instalacion. Instale el sujetaador de desague arriba de la trampa-P y taladre un agujero de ¼” donde va a instalar los conectores de plastico. Instale las conexiones de desague.
- Página 12 Como cambiar los filtros. Siga cada paso antes de comenzar Paso 1 Cierre la válvula del agua entrante al sistema de Osmosis Inversa. Cierre la válvula del tanque de almacenamiento. Abra la llave del Osmosis Inversa y drene el agua hasta que ya no haya presión. (Permita unos minutos para que el sistema se drene completamente).
- Página 13 Procedimiento recomendado para sanitizar el equipo. Cierre el paso del agua entrante. Drene el tanque de almacenamiento abriendo la llave del Osmosis Inversa. Remueva todas las membranas y filtros. Añada 3 cucharadas de cloro en el portafiltros del prefiltro. Apriete todos los portafiltros para evitar goteras. Cierre el agua entrante.
- Página 14 Guía de posibles problemas. SINTOMAS CAUSA PROBABLE SOLUCION Tanque sin presión necesaria Proporcione una presión al tanque vacío de 5-7 psi NO HAY AGUA Suministro de agua cerrado Abra la llave principal de suministro de agua Baja presión de agua (40 psi min.) Contacte a su distribuidor para que le ayude Prefiltro tapado Reeemplace el prefiltro...
- Página 15 WATER TEC IMPORTANT: AIR GAP FAUCET The 3/8” gravity drain line must NOT have any loops, kinks or sharp bends. Cut the 3/8” drain tube so that it is short enough to avoid KINKING or SAGGING. The counter top or sink must have a 1 ¼”...
- Página 16 WTRO-2 RED: Cold Water Supply BLUE: Processed Water (faucet) YELLOW: Connect to Tank BLACK: To Drain (via the air gap on faucet) FILTERS: 1-PS05-10 MEMBRANE OPTIONS: TFC-24 1-CB10-10 TFC-36 1-2X10-GAC TFC-50 TFC-75 Serial No.: _______________________ Date of Installation:__________________ Pre-filter Sediment Pre-filter Carbon Membrane Polishing filter...
- Página 17 WTRO-3 RED: Cold Water Supply BLUE: Processed Water (faucet) YELLOW: Connect to Tank BLACK: To Drain (via the air gap on faucet) FILTERS: 1-PS05-10 MEMBRANE OPTIONS: TFC-24 2-CB10-10 TFC-36 1-2X10-GAC TFC-50 TFC-75 Serial No.: _______________________ Date of Installation:__________________ Pre-filter Sediment Pre-filter Carbon Post filter Carbon Membrane...
- Página 18 FIVE YEAR WARRANTY WATER TEC OF TUCSON warrants each new Reverse Osmosis unit to be free from defects in materials and workmanship under normal use within the operating conditions listed below. For a period of FIVE YEARS from date of purchase we will repair or replace any part of this Reverse Osmosis unit which we find to be defective in operation because of faulty materials or workmanship.
- Página 19 Water Tec of Tucson 4601 S. 3RD Avenue (520)790-1512 (520)745-0549 Fax Tucson, Arizona 85714 www.water-tec.com Authorized Dealer:...