Publicidad
Idiomas disponibles
Idiomas disponibles
WATER TEC
AIR GAP FAUCET
The counter top or sink must
have a 1 ¼" to 1 ½" hole in it
in order for the Air Gap Faucet
to properly fit. Center the
faucet and slip the mounting
spacer over the shank and tubes
between the shank nut and the
bottom of the kitchen sink or
counter top. Tighten the shank
nut. Do not over tighten.
WATER TEC
NON-AIR GAP FAUCET
IMPORTANT:
The 3/8" gravity drain line must
NOT have any loops, kinks or
sharp bends. Cut the 3/8" drain
tube so that it is short enough to
avoid KINKING or SAGGING.
Adaptor
3/8" BLUE TUBE
(FROM RO SYSTEM)
Publicidad
