Headset Operation - Maxon PC-50 Manual Del Propietário

HEADSET OPERATION

Note: If using the PC-50 as a belt worn radio with the
headset, range will average 1/8th mile or more. When
using the PC-50 as a handheld radio, range will
average 1/4th mile or more.
1) The PC-50 is supplied with a detachable headset
with boom microphone for hands-free operation.
2) Remove the headset from the box and plug the
two-prong connector into the two jacks on top of
the PC-50.
Note: The diameter and length of each prong
varies slightly. Match them to the jacks for correct
connection.
3) Adjust the headband to a comfortable fit, the ear
speaker pad should fit snugly in the center of your ear.
Adjust the boom microphone to a point about an inch
away from your mouth.
4) Follow all instructions under the Operating
Instructions section to install the batteries and antenna.
5) Turn the power on and set the volume to a
midway point.
6)
Move the channel selector knob to the desired
channel (A - E) to communicate with other 49 MHz
radio users on the same channel.
7