Indel B SAFE 30 EASY Instrucciones De Uso página 14

SAFE 30 E A SY
IN S TRUC TIO N S FO R US E
The Safe, after the installation, appears to the user with the Double code system already set by the
Manufacturer.
Personal code (of 4-6 digits, for ordinary use) and Master code (of 6 digits, for emergency openings).
Adhere to the following instructions for Ordinary use.
SA FE C LO S U R E
Enter a Personal code (from 4 to 6 digits) and press the LOCK key (#). The display will show the message
"CLOSE". When the door is closed, the display will show the message "CLOSED" and subsequently the
Personal code entered, as a memorandum to the user.
In the front panel of the Safe, a short illustrated sequence is reported describing the door opening and
closure procedures.
SA FE O PE N I N G
G U E S T LO C K I N G
• Key in any 4-6 digits numbers as the password.
• Press #LOCK .
• Will display "CLOSED" after locking.
G U E S T U N LO C K I N G
• Just need to key in the last guest password.
• Will display "OPENED" after unlocking.
WARNING
The safety box will automatically lock for system protection for 15 minutes in case consecutively FOUR times
of wrong password input
M A N AG E M E NT PA S S WO R D I N S TR U C TI O N (M A S TE R CO D E)
Management password is available for unlocking in case the guest forgets the password.
U N LO C K I N G W I T H T H E M A N AG E M E N T PA S S WO R D
• Input the current management password.
• Monitor shows "-OPEN-", then "OPENED".
The ex-factory initial management password is 848711. It can be changed according to management
needs. The detailed operation is as shown in: "HANDHELD DEVICE (CEU U8) USER MANUAL - CHANGE
THE MANAGEMENT BY CEU".
SAFE_30_EASY_20181220
12