Broan 192 Manual Del Usuario página 6

OPERATION
Before using heater, make sure heater has been
properly installed according to installation steps
under "INSTALLATION" on page 3.
The heater can be operated using its built-in ther-
mostat or a remote thermostat (such as the Model
86W Line-Voltage thermostat or an appropriate
low-voltage thermostat and transformer/relay). The
Model 85 Kit is available for surface-mount applica-
tions. Purchase these accessories separately.
THERMAL OVERLOAD PROTECTOR
Your heater is equipped with a manual-reset ther-
mal overload protector. If heater fails to operate
when thermostat is turned to its highest setting:
1) Turn off power at service entrance.
2) Remove knob and grille.
3) Press button marked "RESET" .
This type of device is particularly useful (compared
to automatic reset devices) because it encourages
the user to find and correct the cause of overheat-
ing unit when resetting the protector.
TO AVOID PROPERTY DAMAGE WHEN USING
THIS HEATER TO PREVENT FREEZE-UPS:
Make sure heater functions properly before leav-
ing unattended. A tripped protector will prevent the
heater from operating.
DRYWALL
THERMAL
OVERLOAD
GRILLE
BUILT-IN
THERMOSTAT
HEATER HOUSING
POWER CABLE
MODELS 192 • 194 • 198
Page 6