Installation
The Indoor Siren can be:
- fixed permanently
- or easily detached & moved around the home
1/ Permanent fixing
With screws (supplied)
• Place the not yet replaced rear panel in the desired
position: 2 easy-pierce zones are provided.
• Screw through them to mark the hole locations.
• Then drill the wall and insert the plugs.
• Screw the rear panel firmly onto the wall.
• And close by replacing the Siren onto
the rear panel.
Also possible with double-sided tape
(not supplied)
• Use double-sided tape suitable for the type
of surface, and follow the instructions provided.
• Close the Indoor Siren unit by replacing the rear
panel.
• Place the tape on the back, and stick it onto
the support.
2/ Detachable & portable
Handy tip!
Hang the Indoor Siren like a picture!
- The hook hole on the back makes it easy to hang.
- It can also be detached and moved around
in your home.
15
Copyright © 2017 Somfy SAS. All rights reserved.