Astralpool Smart 30 Manual De Instalación Y Mantenimiento página 4

3. SAFETY WARNINGS AND RECOMMENDATIONS:_____________________________________________________________________

The equipment should be assembled and handled by truly qualified people.

Current electrical and accident prevention regulations should be followed.

Under no circumstances will the manufacturer be held responsible for the assembly, installation or start-up, nor any handling or
fitting of components unless they are carried out on its premises.

The AstralPool Chlore Salt Electrolysis Systems (42347, 42348, 42349) operate at 230VAC, 50/60Hz. Do not attempt to alter the
system to operate at a different voltage.

Check all the electrical connectors are well tightened to avoid false contacts and their consequent overheating.

Before installing or replacing any component, disconnect the equipment from the mains, and use exclusively spare parts supplied
by AstralPool.

Taking into account the fact that the equipment produces heat, it must be installed in places with sufficient ventilation. Fan
openings should be kept free of any element that could obstruct then. The equipment should not be installed near flammable
materials.
The AstralPool Chlore Salt Electrolysis Systems (42347, 42348, 42349) have a protection degree of IP24. They should never be

installed in places susceptible to flooding.
If the electrolysis equipment does not have cover detection, you must minimise the production of the equipment, provided that the

cover is on the swimming pool. Otherwise, there may be an excess of chlorine that could cause the swimming pool materials to
become deteriorated.
2