Controls & Features - Cub Cadet LS 25 CC Manual Del Operador

Controls & Features
Cylinder
Tongue
Jack Stand
Engine Controls
See the Engine Operator's Manual for the location and function
of the engine controls.
Beam Locks
These two locks secure the beam in the horizontal or the vertical
position. The vertical beam lock is located next to the oil filter.
The horizontal beam lock is located on the beam support latch
bracket.
Control Handle
The control handle has three positions; Forward, Neutral and
Reverse. See the Operation section for instructions.
Wedge
The wedge is used to split the wood.
Log Dislodger
Log Dislodger
The log dislodger is designed to remove any partially split wood
from the wedge. This may occur while splitting large diameter
wood or freshly cut wood.
Log Tray
The log cradle is designed to catch the log after it is split.
Tongue
The tongue is used to attach to a towing vehicle for transportation.
End Plate
The end plate holds the log in place while the wedge splits it.
Control
Handle
Horizontal
Beam Lock
Wedge
Beam
Vertical Beam Lock
4
Log Tray
End
Plate
11