Fimar MSD/300P Manual De Uso Y Mantenimiento página 42

Ocultar thumbs Ver también para MSD/300P:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 91
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ BELL PACKAGING MACHINE MCD
Vacuum pump pre-heating
It is recommended to carry out the pre-heating operations of vacuum pump at the first daily
switching on, especially in the winter period.
1. Press main switch (A) (MCD - MCD/S) or operate selector (N) (MCD/CS) to activate the
power supply of the equipment.
2. Press the button (G).
3. After about 15÷20 seconds press button (G) to stop vacuum pump.
Setting up of working programmes
The equipment is provided with 20 programmes that can be set up.
1. Press main switch (A) (MCD - MCD/S) or operate selector (N) (MCD/CS) to activate the
power supply of the equipment.
2. Press the button (B) to start the appliance.
3. Press buttons (E-F) to select the working programme to be set up.
4. Press the button (D) and keep it pressed for some seconds.
GB
5. Press buttons (E-F) and button (D) to set up all values of the operating parameters.
– Vacuum: it sets the operation time of vacuum pump (1÷99) in seconds.
– Vacuum type: it sets up the kind of operation of vacuum pump.
0 - Standard operation
1 - Intermittent operation
Important
Intermittent operation allows you to vacuum package those products that tend to rise
or to boil.
– Seal: it sets up the sealing time of bags (0,1÷9,9) in seconds.
– Gas: it sets up the intake time of inert gas (0÷9,9) in seconds.
– Print: it sets up the number of receipts to print (0÷9) and the days, within those prod-
uct (0÷183) is to be consumed (for model MCD/S - MCD/CS only).
– Blinking cursor line: it enters the ingredients contained in the bags in the receipt by
means of the special key-board (for model MCD/S - MCD/CS only).
Max. 16 ingredients can be entered and each of them can have a maximum length of 16
characters.
Operation in "automatic mode"
1. Press main switch (A) (MCD - MCD/S) or operate selector (N) (MCD/CS) to activate the
power supply of the equipment.
2. Press the button (B) to start the appliance.
3. Press buttons (E-F) to select the working programme.
- 18 -
English language

Publicidad

Tabla de contenido
loading

Tabla de contenido