Using The Robot With The Dry Wipe Attachment; Removing The Dry Wipe Attachment; Using The Invisible Wall; Placing The Batteries In The Invisible Wall - Philips FC8832 Manual Del Usaurio

English
18

Using the robot with the dry wipe attachment

Removing the dry wipe attachment

2
1

Using the invisible wall

Placing the batteries in the invisible wall

3 Fold both ends of the dry wipe around the dry wipe attachment and
fasten the dry wipe onto the attachment by pushing the fixation blocks
into the recesses.
4 Insert the fixation lug of the dry wipe attachment into the opening just
behind the wheel on one side of the robot and push until you hear it lock
into place with a click. Then repeat these actions on the other side.
5 Turn the robot and place it on the floor on its wheels with the dry wipe
attachment touching the floor.
When the dry wipe attachment is attached, you can use the robot in any
mode and on all hard floors. Do not use the dry wipe attachment on carpet
or rugs.
1 Remove the dry wipe attachment as soon as you have finished wiping
the floor.
2 Turn the robot upside down and place it on the floor or on a table.
3 Push one end of the dry wipe attachment towards the wheel on the
other side of the robot to release it. Then pull the attachment off the
robot.
The invisible wall operates on four AA batteries.