Assembling Cleaner; Carton Contents - Hoover SteamVac FH50020RM Manual Del Proprietário

1. Assembling cleaner

Carton contents

1.1
A
B
Remove all parts from carton and identify
each item shown. Make sure all parts are
located before disposing of packing.
A. Carpet cleaner body
B. Upper handle
C. Handle bolts and nuts
D.
Hose*
STEP I Attach Handle
1.2
1.3
1.4
www.hoover.com
C
E
With cord hook (A)
to back of carpet
cleaner, push upper
handle down onto
lower handle. Push
bolts into holes on
front of handle,
but do not add nuts
yet. If bolts will not
go through hole
easily handle is not
pushed completely
down.
Slide hose holder
onto screws in
back of machine.
Now puts nuts in
place and use screw
driver to fasten.
(on some models)
Remove tool and
taped screw from
holder. Insert pro-
jections on holder
into slots on back
of cleaner. Insert
screw and tighten
with screw driver.
(on some models)
STEP Il Store Hose
1.5
I
H
Start with converter end of hose (H). Fit
converter over tab near tool holder (I). Press
converter firmly to snap in place. Press
solution tube (G) into clip next to converter
as shown.
Wrap hose around
hook on upper
handle (K). Press
hose into clips on
upper hose holder
(L).
How to reattach
tool cover.
STEP Il Store Tools
1.7
1.8
8
(on some models)
G
1.6
K
L
(on some models)
Cleaning Tool
To store cleaning
tool, open tool
door, place nozzle
in bracket and fit it
securely into posi-
tion. To remove,
reverse this proce-
dure.
Break-Away
Door
The tool cover is
designed with a
break-away feature
which allows it to
snap free if it is
pushed open too
far. To reattach,
align hinges of
cover with slots on
sides of tools stor-
age area. Push
cover down to
secure in place.
L