Environmental Operating Conditions; General Operating Instructions; Cleaning, Service, Transport & Storage - Cole-Parmer 50006-00 Manual De Instrucciones

ENVIRONMENTAL OPERATING CONDITIONS

The mixer must operate in the following conditions:
• Indoors
• Altitudes not exceeding 2000 meters
• Temperature from 41 to 104°F (5 to 40°C)
• Maximum relative humidity 80% for temperatures up to 87°F (31°C)
decreasing linearly to 50% relative humidity at 104°F (40°C)
• Pollution degree 2 in accordance with IEC 664 "Normally only
non-conductive pollution occurs. Occasionally, however, temporary
conductivity caused by condensation may be expected."

GENERAL OPERATING INSTRUCTIONS

The mixer must be securely mounted as specified in the installation
instructions. Ensure the mixing shaft and blade are securely attached.
The mixer is now ready for use to mix liquids.
Button Operation Functions:
Power Button - Turns the mixer motor on and off.
When initially turned on, mixer will spin at 50 rpm.
Increase Button - Increases the speed.
Decrease Button - Decreases the speed.
If the load is too great, an overload condition may occur and the mixer
will automatically power off. To resume operation, reduce the mixer load
and press the power button.
CLEANING, SERVICE, TRANSPORT & STORAGE
Cleaning
Using a mild soap and water solution, wipe the housing and control panel
of the mixer with a damp cloth. Do not use chlorine bleach, chlorine-
based cleanser, abrasives, ammonia, steel wool, or scouring pads with
metal content or similar harsh solvents or abrasives. These may damage
the surface of the instrument.
Service
Do not attempt to service or repair mixer. If the mixer housing is
opened, the warranty becomes void. Contact Supplier for return
authorization and return instructions.