Using The Flash - Walimex Pro Speedlite LithiumPower 58 HSS4 Manual De Instrucciones

2. Mounting the Speedlite to the camera
Turn the fastening Turn the ring clockwise
wheel counter-clockwi- to tighten it.
se as far as possible.
Slide the foot of the
flash into the flash shoe
mount of the camera.
6. Using the flash
1. Switching the flash on/off
• Switching on: Slide the On/Off switch to the right to position ON
• Trigger a test flash, press the test button instantaneously.
• Switching off: Slide the On/Off switch to the right to position OFF.
2. M Mode – manual setting
• Press the MODE button and set the flash to M Mode (manual mode).
• With the adjusting wheel you can set the flash power manually, like:
Power settings:
1/1-0.3 1/1-0.7
1/1
1/2+0.7 1/1+0.3
• Press the Set button to save.
42
To remove the flash
loosen the tightened
fastening wheel. Slide
the flash out of the
flash shoe mount of the
camera.
1/2-0.3 1/2-0.7
1/2 1/4
1/4+0.7 1/1+0.3
3. Wireless settings – radio remote triggering
You can use the flash in Master and/or Slave function.
Exemplary image of the positioning:
Outdoors
Activating the wireless function:
• Press the
• Set the Master or Slave function,
the channel or group RATIO needed,
just as required
...
• Press the Set button to save.
...
Indoors
10m(32.8ft)
80°
8m(26.2ft)
button for 2 sec.
15m(49.2ft)
12m(39.4ft)
43