Tilt Function; Product Description - Etac Swift Mobil Tilt Manual Del Usuario

EN
General information
Thank you for choosing a shower chair from
Etac.
In order to avoid injury during handling
and use, please read through this manual first.
In the manual, the user is the person sitting in
the chair. The assistant is the person operating
the chair.
Swift Mobil Tilt is a shower and toilet chair
intended to make hygiene care easier for peo-
ple with reduced mobility and their carers.
Swift Mobil Tilt has been tested by a testing
institute and complies with the requirements
stated in EN ISO 10993-1 and SS EN 12182.
It is designed for use in showers, with hand
basins and over toilets, as well as for transport
to and from the sanitary room.
Every component of the chair is designed to
make things easier for users and assistants.
This symbol appears in the manual
along with text. It indicates
instances where the safety of the
user or the assistant may be at risk.
Assembly/Dimension table
fig. A
Product description
fig. B
1 Bolt
2 Legrest
3 Seat
4 Armrest
5 Backrest upholstery
6 Headrest
Height adjustment
fig. C
The height can be adjusted with ease by
positioning the bolt in the required position
(fig. C 1).
Swift Mobil Tilt is height-adjustable
between 45 and 60 cm (fig. C 2).
Check that both sides are similarly
adjusted, otherwise stability will be
reduced. Do not use the chair if the
bolt (orange) is not locked (fig. C 3).
Tilt function
fig. D
The assistant can adjust the sitting angle with
ease by holding in the handle and tilting to the
required position.
Make sure that the wheels are locked if the
tilt function is used when the user is sitting in
the chair.
Legrest
fig. E
The assistant can easily raise and swivel the
legrests to the side for the user to sit down in
or get up out of the chair (fig. E 1). The foot-
rests are detachable.
Various height adjustment options are avail-
able by moving the locking pin (fig. E 2). The
legrests have 6 different height settings.
Armrest lock (accessories)
fig. F
Secure the armrest in the lowered position by
inserting the locking pin in the hole. When
the armrest lock is not in use, the pins can be
stored in pockets in the back of the backrest
upholstery.
Recycling
This product should be recycled as per national
regulations.
12