Reset Button - Eton ELITE 750 Guía De Funcionadmiento

EXTERNAL ANTENNA SOCKETS
The external antenna sockets are used to connect the ELITE 750 to
advanced performance antennas.
On the right side of the radio are the 50 Ohm BNC sockets for FM
and Shortwave. 50 or 75 Ohm coaxial cable can be used to feed the
properly designed antenna. To find antennas we recommend that you
perform a web search by typing 'FM antennas' or 'shortwave anten-
nas' into an Internet search engine.
There is also a black and red socket, labeled 500 Ohms, designed
to work with a high impedance Shortwave antenna, 300-600 Ohms,
such as a long wire antenna. Plug a long piece of wire, 10 to 35
meters or 30 to 100 feet, into the red socket and position it above
ground, running in as much a straight line as possible, not touching
any other metal objects. If you do this indoors, position the wire as
close to windows as possible. Plug a 10 to 20 meter or 30 to 60 foot
wire into the black socket and let it run on the floor or ground. Or
attach the black socket to a cold water pipe with as short a piece of
wire as possible.
On the rotateable AM antenna, at the top of the radio, is a socket for
50 or 75 Ohm plug-in AM antennas.
When using external sockets select EXTERNAL with the selector
switch on the right side of the radio. When using the internal anten-
nas of the radio, switch it to ANTENNA.
NOTE: always unplug all antennas that are mounted outside when a
lightning storm is predicted.
18
ELITE 750
OWNER'S MANUAL

RESET BUTTON

The reset button is located to the left under the TUNING knob. When
the unit is dead or seems to stop functioning properly, press the
Reset Button to reboot the unit. Stored memories and the alarm
clock settings will not be eliminated. After it's pressed the AM station
spacing will have to be set again for North America.
EMPTY COMPARTMENT ON BACK OF
THE RADIO
Use the small, empty compartment next to the battery compartment
as you wish.
SYSTEM CODE SETTING
To enter different system codes turn off the radio and perform a
quick, short press of the ENTER button. "_ _" appears on the upper
right corner of the display. Enter the system code as below, then push
ENTER to confirm the system code.
ELITE 750
OWNER'S MANUAL
19