Soundcast Melody Manual Del Usuario página 9

In order to connect your Bluetooth music device to Melody, the
1. Press the power button to turn Melody
on, the blue LED will begin flashing
2. Press Melody's Bluetooth button to
begin the pairing process (the blue LED
will flash at a slower speed to show that
Melody is discoverable)
3. Enable the Bluetooth function
on your music player (iPod,
Smartphone, etc.) and set it to
"Scan" or "Search for devices"
4. Select the item labeled "Melody"
from the list of devices to finish the
pairing process (if prompted for a
"Pass Key Code", enter 0000)
5. In some cases you may need to tell
the device to connect to Melody after
pairing. Once Melody is connected
with the device, the blue LED will stop
flashing and remain on.
Pairing your Bluetooth
following pairing process must be completed.
NOTE: In subsequent uses, Melody will look for your audio player and
will connect to it automatically as long as your music player's Bluetooth
function is on and the device is within range.
Melody can remember up to 6 different Bluetooth devices and will
always connect to the last connected device while turned on. To
change to a different device, press Melody's Bluetooth button
(the LED will start flashing slowly), then select "Melody"
from the devices list on your music player.
9