Removing The Slide Oven Door; How To Remove The Inner Glass Of The "Full Glass" Panoramic Door - BORETTI BPON 45 Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 155

Removing the slide oven door

1. Decide whether you want the door to open to the left or right
before positioning the appliance in the oven recess.
2. Fully open the door.
3. Remove the four fixing screws from the door hinge.
4. Remove the four plastic caps from the opposite side and
unscrew the locking pin.
5. Turn the door 180°.
6. Secure the door in its new position using the 4 screws
removed previously.
NOTE: Make sure that the oven door is perfectly parallel with
the front panel. If it is not, adjust it by means of the
screws you have just inserted.
7. Fix the oven in the oven recess using the 4 screws and the
plastic spacers provided.
How to remove the inner glass of the "FULL
GLASS" panoramic door
1. Wear protective gloves.
2. Place the door on a flat horizontal surface face down on a
soft cloth to avoid scratching the visible part.
3. Simultaneously press the keys of the two side covers,
removing the upper strip.
EN
33

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bpon 60Bpon 90

Tabla de contenido