Installed Devices - Circutor SVGm IP54 Manual De Instrucciones

SVGm IP54

7.3.- INSTALLED DEVICES

The type of device are configured in this screen,
● Type of device: Master / Single / Slave
In this screen the type of device is selected, the possible options are:
 Single: select this option if the SVGm IP54 does not have generators connected in parallel.
 Master: select this option if the generator is going to be used as the "master" of a group of
devices in parallel.
 Slave: select this option if the device is going to be used as the "slave" of a group of devices
in parallel.
Once the device has been configured as the "slave", the next configuration step is shown in
section "
7.8.- ETHERNET COMMUNICATIONS
Note: The
Press the key to save the modified settings.
Instruction Manual
Figure 48: Configuration screen: Installed units
and / keys are disabled in the slave devices.
.
Figure 48
".
121