Descargar Imprimir esta página

Choosing Wearing Preference; Making A Call; Ending A Call; Answering A Call - Jabra FreeSpeak 250 Manual Del Usuario

Publicidad

Idiomas disponibles

Idiomas disponibles

6

Choosing wearing preference

FreeSpeak 250 is ready to wear on
the right ear. If you prefer the left,
gently rotate the MiniGel 180°.
For optimal performance, wear
FreeSpeak 250 and your Bluetooth
phone on the same side of your
body. In general, you will get
better performance when there
are no obstructions (including
parts of your body) between the
headset and the phone.
7

Making a call

If JABRA FreeSpeak 250 is off, turn it on now (see Turning headset on/off section).
Using phone's keypad
1. Dial number on keypad.
2. Press phone's "send" key.
Using voice-activated dialing (after you've set up voice tags on your phone)
1. Press and release
once. You'll hear 1 short beep while doing this.
2. You'll then hear the voice-activation tone; say the name of the person you wish to call.
NOTE: Record voice tag from headset for better reception.

Ending a call

8
Press and release
once.
OR
End call from phone's keypad.
8
Fig. 4
9

Answering a call

After you hear the ring tone, press and release
OR
Answer the call with your phone's keypad. You may then need to transfer the call to
the headset by pressing and releasing
10

Call-waiting*

(Recommended) Use standard method from your phone's keypad which typically
involves pressing the "send" button
OR
Press and release
once to answer the incoming call and toggle between calls
(some phones do not support this headset feature).
IMPORTANT: Do not hold the
button down too long when making, ending, or
answering a call.This should only be a quick tap, so you don't put the headset into
pairing mode by accident.
* See Enhanced features section for alternative call-waiting instructions for
phones that support the hands-free profile.
TIPS AND SOLUTIONS
11

Resetting the headset

If the headset is not responding or the blue light will not turn on or off after
pairing, you may need to RESET your headset.
1. Fully insert the headset into the charging cradle.
2. Plug the JABRA FreeSpeak 250 AC adapter into the headset's charging cradle.
3. Plug the AC adapter into the electrical outlet.
once.
once (depending on your phone).
9

Publicidad

loading