Prepare For Installation - U.S.Robotics MAXg USR5451 Guía Breve De Instalación

English
U.S. Robotics Wireless
Package Contents:
USR5451 Wireless MAXg Access Point 5VDC power supply
Quick Installation Guide
One (1) Ethernet cable

Prepare for installation

You must have administrator rights on your computer in order to install this product.
Be sure to find out what letter your CD-ROM drive uses before you begin installing your new prod-
uct. You will need to know this to properly install your software.
Connecting the Wireless MAXg Access Point
Note: For the most updated information, visit: http://www.usr.com/support
You can also refer to the User Guide on the U.S. Robotics Installation CD-ROM for more
detailed information.
Step One: Connect the Wireless MAXg Access Point
Note: Look at the label on the bottom of the Wireless MAXg Access Point and write down
the LAN MAC address listed before you physically place the access point. You will need
this for future reference.
A. Connect the supplied Ethernet cable to the LAN port of the Wireless MAXg Access Point and
to the LAN port of a networking device with routing capabilities, such as a router.
B. Connect the antenna to the Wireless MAXg Access Point.
C. Connect the power adapter to the Wireless MAXg Access Point and to a standard wall power
outlet.
Note to UK Users: Attach the correct power plug to the power adapter.
computer
MAX
g Access Point Installation
Installation CD-ROM which includes User Guide
Detachable antenna
1