Microlab MD332 Manual Del Usuario página 12

80-MD332 970001 02 09-04-14
CONTROLES
PANEL FRONTAL
1. Pantalla indicadora
2. Encendido / modo espera
3. Configuración del reloj
4. Configuración de la alarma
5. Control de volumen
6. Receptor del control remoto
7. Selector de entrada
8. Control de sintonía
CONTROL REMOTO
1. Encendido / modo espera
2. Mudo
3. Selector de entrada
4. Configuración del reloj
5. Configuración de la alarma
6. Apagado automático
7. Restablecer
8. Control sonidos altos
9. Control sonidos bajos
10. Control de volumen
11. Selector de banda
12. Sintonización
13. Memoria
14. Emisoras memorizadas
15. Reproducción / pausa
16. Retroceder
17. Avanzar
18. Menú
19. Teclas de dirección
20. Aceptar
NOTA: Deberá colocar dos pilas "AAA" (NO INCLUIDAS),
en el compartimento para tal fin en el lado inferior del control
remoto para que este funcione.
PANEL POSTERIOR
1. Encendido / apagado general
2. Fusible
3. Cable de alimentación
4. Disipador térmico
5. Entrada de audio auxiliar
6. Conector antena FM
7. Conector antena AM
8. Conector iPod
ES
21
S
1. ST-BY
Depress this button to standby mode
2.
MUTE
Depress the MUTE button to turn off all audio output. The display will flash "00" repeatedly indicating volume at
zero level. Depress MUTE again to return to previous audio level.
3.
INPUT selector
Depress to select between different audio sources, AUX, AM radio, FM radio or iPod.
4.
CLOCK adjustment
In Clock mode, depress the "CLOCK" button and the hour digits will flash. Press the VOL
hour ranging from "00" to "23". Depress the "CLOCK" button again, and the minute digits will flash. Depress the
VOL +/- to set the minute digits ranging from "00" to "59". Depress the "CLOCK" button again to exit the
adjustment mode.
5.
ALARM setup
Depress to configure the alarm time setup. With the iPod docked, the setup will activate the alarm with song
from the iPod. Without the iPod, the most recently tuned radio station will be used as the alarm.
Setup: In standby mode, depress the "ALARM" button to set the desired alarm time. The 2 hour digits will flash,
press VOL +/- button to set the desired hour ranging from "00" to "23". Then depress the "ALARM" button again
and the minute digits will flash. Press the VOL +/-
the "ALARM" button again. The panel will display "good" indicating alarm setup is completed.
6. SLEEP
Set the desired period to shut down the system, ideal for bedtime. Options include 15 minutes, 30 minutes or 45
minutes.
7.
RESET
Set the entire system to default factory values. The system volume is set to 20dB, and the TREBLE & BASS at
0dB.
8.
TREBLE: Mid to High frequency attenuation, +/-
9. BASS: Low frequency attenuation, +/- 7dB
10.
VOL+/- : volume adjustment from 00 to 60dB
RADIO CONTROLS
11. FM/AM: Toggle between Frequency modulation or Amplitude modulation.
12.
TUNE+/-:Scan the radio frequency for radio stations
13.
MEMORY: Store radio stations frequency for quick station tuning.
I. Scan the frequency range for your preferred radio station and the depress "MEMORY" button to save the
station to a preset number. For example, "P01" is a format used in the iDock.
ii. Then press "MEMORY" button again, the digital screen will display "good" to indicate a successful stored
frequency.
iii. The iDock allows up to 15 radio stations to be saved.
14.
PRE+/- : Depress to select the preset radio stations.
Delete preset radio stations. Press "MEMORY" button, and then the "RESET" button to clear all the preset radio
stations.
Scroll menu selection
+/- to set the correct
button to set the desired minutes. To exit the setup, depress
7dB
EN