Administration (Switch Configuration); Administration (User Targets) - Tripp-Lite NetCommander B070-016-19-IP Manual Del Usuario

15. Administration (Switch Configuration)

The Switch Configuration Screen allows the Administrator to give each
computer/server a unique name, making it easier to differentiate between
them. By default, computers/servers are titled Server 1, Server 2, Server 3,
etc. Follow the steps below to update the computer/server name.
1. From the menu click Switch Configuration. The Switch Configuration
window appears, see the figure below.
2. In the Server Name section, change the name of the connected computers/
servers by selecting the desired name and typing a new name. Click Apply
to save changes.
Install Switch Definition File
Also included in the Switch Configuration Screen is a section to install a
new switch definition file. In the event that Tripp Lite updates the Switch
Definition file, the file will be available in the Support section of our website
- www.tripplite.com.
1. Click the Browse button next to the Install Switch Definition File box and
select the new file.
2. A download button will appear next to the selected file. Click on the
button to download the new Switch Definition File.
3. Click the Apply button.

16. Administration (User Targets)

By default, access is denied to all servers for all user types except
Administrators. An Administrator must define the access rights of each
user separately. Follow the instructions below to customize individual user
access.
Note: When cascading a NetCommander KVM Switch off of the
NetCommander IP, any user that has access to the cascaded port will
have access to all computers/servers connected to that port. Any security
restrictions must be done using the cascaded KVMs OSD.
1. From the menu click User Target. The User Targets Configuration
window appears, see the figure below.
2. Select a user from the User drop-down menu.
3. Check the Target servers you want the selected user to have access to. To
select all Target servers, press Select All.
4. Click Apply, saving the selection(s).
5. Repeat the above steps for each user.
11