User Preset; Night Light - Renew PLUS Serie Manual De Instalación

OPERATION
(continued)

USER PRESET

• Nozzle position, water pressure, dryer*/water/seat temperatures can be preset
and stored for 2 different users . Wash and dry functions can only be set while
seated on unit .
• SETTING PRESET 1: Set position, pressure, dryer*/
water/seat temperature to preference . Press STOP and
FORWARD NOZZLE POSITION at the same time for 3
seconds . Press STOP or just wait . Red light will blink for
5 seconds .
• SETTING PRESET 2: Set position, pressure, dryer*/
water/seat temperature to preference . Press STOP and
BACKWARD NOZZLE POSITION at the same time for 3
seconds . Press STOP or just wait . Red light will blink for
5 seconds .
NOTE: Changing batteries will not retain remote settings .
CHOOSING USER PRESET
• Press selected preset user 1 or 2 on top
to activate preset nozzle position, water
pressure, and temperatures .

NIGHT LIGHT*

• Red LED light provides enough brightness to see the toilet without
turning on the bathroom light .
• Night light can be turned on and off by pressing + on the remote
for 3 seconds while not seated .
DEODORIZER*
• Active carbon deodorizing function automatically starts when Renew Plus
seat is occupied and continues for 1 minute after seat is vacated .
The automatic deodorizer feature can be turned on/off and fan speed adjusted .
• Press STOP and ECO MODE for 3 seconds . Press + or - to set deodorizer
fan speed from 0 (off) - 3 (high) . Leave remote alone for 5 seconds to
complete setting .
* Renew Plus feature only.
™
14
www.RenewSeats.com
™