Warranty And Service; Important Warranty Information - AgraTronix GMT-Grind Manual Del Operador

If the GMT-Grind Grain Moisture Tester should display inaccurate readings
or cease to operate, follow these steps:
1. Review this manual, particularly the Operations sections.
2. Call our toll-free number, 1-800-821-9542, and ask for customer service.
Be certain to call between 8:30 a.m. and 4:30 p.m. Eastern Standard Time.
Describe the problem to our service personnel so that a determination
can be made as to what is wrong with the tester. If necessary,
arrangements can be made for repair or replacement and a Return
Authorization number will be given to you. Be certain to have the serial
number available.
3. In the event factory service is required AND AUTHORIZATION HAS BEEN
OBTAINED, remove the battery from the tester, pack the unit carefully and
return to Agratronix PREPAID. Do not return the battery. Be certain to in-
clude your name and return address.
4. Do not return the tester without following the above procedure. THERE WILL
BE A $15.00 HANDLING CHARGE MADE ON ALL UNITS RETURNED AND
NOT FOUND TO BE DEFECTIVE.
5. Repairs will be made free of charge during the warranty period. After the
warranty expires, the tester will be repaired at a flat rate.

Important Warranty Information

1. PROOF OF PURCHASE (retail sales receipt) must be included with
returned tester to obtain free warranty service. Without proof, tester will
be assumed to be out of warranty and repair costs will be invoiced.
2. Every GMT-Grind has a serial number identification. Note this serial num-
ber on the appropriate line on the next page and refer to it in all communi-
cation with the factory.
The Agratronix GMT-Grind Grain Moisture Tester is guaranteed by Agratronix to be free
from defects in materials and workmanship for one year from date of retail purchase. This
warranty does not cover the battery or damage resulting from misuse, neglect, accident or
improper installation or maintenance. This warranty does not apply to any product which
has been repaired or altered outside the factory. The manufacturer does not assume any
liability for damage from misuse, dropping the tester or damage resulting from or damage
caused by water or from unauthorized repair. The warranty does not cover any damage
which may directly, indirectly, consequentially or incidentally result from use or inability to
use the GMT-Grind tester.
The foregoing warranty is exclusive and in lieu of all other warranties of merchantability,
fitness for purpose and any other obligation or liability in connection with its product.

Warranty and Service

WARRANTY
30-1