Pride Mobility MV600 Manual Del Usaurio página 11

SETTING
Odometer
Tripometer
Temperature
Clock
Chart 1. LCD Control Panel Information
Press MODE until the setting you want to change appears on the LED screen. Then, press and hold SET and
MODE until the setting blinks, then follow the steps corresponding to your setting in chart 2.
ODO
Operation Press Mode
Selection Use SET to select
option
Exit
Press
Chart 2. LCD Control Panel Information
Battery Charging Mode
During battery charging, the console will display the clock and the battery condition indicator.
Battery Condition Indicator
When the key is turned to the "on" position, this LED indicator gives an approximate reading of battery strength.
When the vehicle's battery voltage reaches a low enough level, a warning beep will sound once, indicating the
batteries need charging. The warning beep will not sound again until the vehicle is restarted or the throttle control
lever is pressed.
Maximum Speed Indicator LED
The maximum speed indicator displays the maximum speed selected with the speed adjustment buttons. The more
bars that are lit, the faster the speed. The maximum vehicle speed will be determined by the HIGH-LOW setting,
which limits the maximum speed to half when set to LOW. The actual travel speed will be shown in the speed
display on the LCD screen.
MV600
I I . Y O U R V E H I C L E
SETTING INFORMATION CHART
CODE
ODO
TRIP
TEMP
TRIP
Press MODE for
2 seconds then
release
Press and hold
SET until option
resets to 0.0
or Press or
Measures mph, km/h, and hours of use.
Also displays total distance traveled
over life of vehicle. (Cannot be reset.)
Displays trip distance traveled. (Can be
reset to "0".)
Displays current temperature in °F or
°C.
Displays time in 12-hour (AM/PM) or
24-hour.
TEMP
Press Mode Press MODE (hour digits fl ash)
Use SET to Use SET to change hours. Alternate
choose °F or °C
pressing MODE and SET to
change minutes and AM/PM.
Press or Press
INFORMATION
or
11