Disassembly And Assembly - Pride Mobility MV600 Manual Del Usaurio

V I . D I S A S S E M B LY A N D A S S E M B LY
DISASSEMBLY
You can disassemble the vehicle into several pieces: the seat, the vehicle base, the batteries, and the battery
shroud. See fi gure 23. No tools are required to disassemble or assemble your vehicle, but keep in mind that
the disassembled sections of the vehicle take up more fl oor space than the assembled unit. Always disassemble
or assemble your vehicle on a level, dry surface with suffi cient room for you to work and move around your
vehicle—about 5 feet (1.5 meters) in all directions. Remember that some vehicle components are heavy and you
may need assistance when lifting them.
WARNING! Do not lift beyond your physical capability. Ask for assistance when necessary while
disassembling or assembling your vehicle.
WARNING! Do not pick up the seat frame or vehicle by the armrests. They are free to pivot, and
you may lose control of the seat if they do so.
IDENTIFICATION KEY
1. SEAT
2. VEHICLE BASE
3. BATTERIES
4. BATTERY SHROUD
Figure 23. Disassembled Vehicle
DISASSEMBLY
1. Remove the seat by lifting it straight up and off of the vehicle. If you encounter resistance when removing the
seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up on the seat.
2. Remove the battery shroud from the vehicle. See fi gure 12.
3. Disconnect the battery tie-down straps.
4. Disconnect all battery harnesses from the battery terminals by sliding back the terminal boots and unscrewing
the nuts from the bolts. See fi gures 13 and 14.
5. Remove the batteries from the battery wells.
ASSEMBLY
1. Reinstall the batteries to the battery wells.
2. Connect the battery harnesses. See fi gures 13 and 14.
3. Secure the battery tie-down straps.
4. Reinstall the battery shroud.
5. Reinstall the seat and rotate it into place.
28
1 2 3 4
MV600