Tm To My Pc; How Do I Connect The Gigavideo580; Extra Options - Marmitek GIGAVIDEO 580 Modo De Empleo

The signal is weak:
1. Try another channel (make sure that both units stay switched to the same channel).
2. Remove the transmitter and/or the receiver from the immediate surrounding of the connected
devices. These devices can influence the radius.
TM

7. HOW DO I CONNECT THE GIGAVIDEO580

TO MY PC
The GigaVideo580 TM can be connected to the 'TV-out' or 'Video-out' of your PC. The
connection can usually be found on the graphics card. The signal needs to be a so-called
'composite video signal'. This is also called 'CVBS'.
Connecting to a PC can be done to the yellow RCA connector or DIN-plug.
• Yellow RCA connector (RCA Yellow)
If your PC is fitted with this connector, the included yellow plug of the RCA cable can be
directly connected to the yellow RCA connector of your transmitter.
• DIN-plug (S-VIDEO)
If your graphics card is fitted with the S-VIDEO-connector, you cannot directly connect the
transmitter to your PC without using an adapter. This adapter 'converts' your S-VIDEO signal
into a composite video signal. This adapter is usually supplied with the graphics card (or PC)
with TV-out.
You can also get this adapter from your Marmitek dealer. (Art.no. 09388).
This standard adapter does not fit to some PCs. If that is the case, please contact the supplier
of the graphics card. To use the TV-out, some settings in the graphics card menu need to be
changed. This is different for each PC and operating system, but usually the correct mode
needs to be selected. Select 'composite', 'CVBS' or 'PAL-G'. More information can usually be
found in the PC manual or graphics card manual. Because there are so many different types of
graphics cards, we cannot offer any support.
To transmit sound, you can use the audio out on the sound card of your PC. Please use an
adapter to convert the 3.5mm plug to a double RCA connection.

8. EXTRA OPTIONS

Extra remote control
If you want to operate your device from various places in your home, or if you want to use just
one single remote control for all your A/V devices, then make your choice from the complete
range of Marmitek universal remote controls; EasyControl or EasyTouch. These replace almost
every remote control you are using at the moment. More information about these so called
universal remote controls can be found at www.marmitek.com.
6 © MARMITEK