en
Vacuum cleaning
12
OPERATING
WARNING!
Always check the appliance and the power cable before use.
Faulty appliances may cause injury and should not be used.
• Attach the required nozzle.
• Pull out the power supply cable by tugging on the
plug until the required length is reached.
A yellow mark on the cable shows you that the maximum
cable length has almost been reached. The maximum
cable length is shown by a red mark on the cable. Never
pull the cable out of the appliance beyond the red mark.
• To switch the vacuum cleaner on, press the ON-OFF
pedal button.
• Set the required suction level by using the
suction regulator:
MIN = slide to the left
MAX = slide to the right
Adjustment of suction level
by means of the suction control on the handle of the
suction hose:
Suction level max.
Suction level min.
= vent closed
= vent open