Olympia PS 53 CC Manual De Instrucciones página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
Lubricating the Cutting Mechanism
If you want to increase the working life of the shredder, you should oil the shredder's cutting
mechanism at regular intervals� Olympia Business Systems Vertriebs GmbH offers a special oil
for shredders� For more information, please contact our hotline�
1
Apply the special oil for shredders in several lines square to the sheet of paper�
2
Set the switch to its a
3
Insert the oiled sheet of paper in the paper infeed� The paper with oil applied is inserted and
oils the cutting mechanism�
Emptying the Waste Bin
Empty the waste bin regularly� This prevents shred material jamming and causing malfunctions
as a result�
1
Set the switch to its o
2
Disconnect the power plug from the power socket�
3
Remove the shredder from the waste bin�
4
Empty the waste bin�
5
Mount the shredder on the waste bin again� The shredder latches audibly in place�
Clearing Residual Material
If the shredder no longer shreds material as you expect, remove any residual material from the
cutting mechanism�
1
Set the switch to its r
material remaining in the cutting mechanism�
2
Set the switch to its o
3
Disconnect the power plug from the power socket�
4
Remove any residual material carefully from the cutting mechanism using an appropriate
pointed object�
Regular Cleaning
Clean the shredder at regular intervals�
1
Disconnect the power plug from the power socket�
2
Use a slightly damp, lint-free cloth to clean the surface of the shredder housing� Do not use
any solvents or cleaning agents�
14
a
ttention
! Risk of property damage through using the wrong oil! Do not use
spray oils� Only use a special oil intended for shredders�
uto
position�
position�
ff
eV
position� The cutting mechanism runs in reverse and releases any
position�
ff

Publicidad

Tabla de contenido
loading

Tabla de contenido