Viking MVLH636SS Guía De Instalación, Uso Y Mantenimiento página 14

11. Mount the lower support bracket with wood screws
(Supplied in mounting hardware kit) on locations
marked on template, then remove template.
12. Install duct cover support bracket to wall flush to ceiling
with drywall anchors supplied (the duct cover support
bracket should be installed about 1/8" (3mm) away from
the ceiling).
13. Install the deflector (Available as an extra kit) under the
duct cover support bracket.
14. Hang hood with the 2 mounting hooks.
WARNING
Excessive Weight Hazard - Use two or more people to
move and install range hood. Failure to do so can result
in back or other injury.
15. Level the appliance, using a carpenters level across
bottom of hood with leveling screws in mounting hooks.
16. Secure hood with 2 screws on bottom.
17. Connect ducting to transition. Seal with duct tape.
Do not use duct smaller than the transition.
Provide and install a duct to connect hood transition to
deflector (The deflector is available as an extra kit).
14