Mutsy Nexo Manual De Instrucciones página 14

· Make sure the pushbar is not in lowest
position
· Place the height limiters hard part (X1)
on the inside of the pushbar tube with
the velcro facing inside.
· Strap the fabric around the pushbar and
close the velcro.
Place the Maxi-Cosi car seat on the
adapters
· Orientate the Maxi-Cosi car seat such
that it is directed rearwards on the
frame.
· Hold the Maxi-Cosi car seat with the
central hinge points of the support
bar directly above the adapters.
· Lower the Maxi-Cosi car seat and
press solidly into the adapters until
you hear a click. Check that the Maxi-
Cosi car seat has been placed hori-
zontally and has been attached prop-
erly by trying to lift it from the frame.
Remove the Maxi-Cosi car seat from the
adapters
· Operate the unlocking system of the
Maxi-Cosi car seat.
· Lift the Maxi-Cosi car seat straight up
from the frame.
Remove the Maxi-Cosi adapters from the
frame (z)
· Press the release button (z1) on the
adapter. Turn the top of the adapter
outwards (z2) and take the adapter out
of the cam from the top. (z3)
English
9