Operating Tips; Replacement Parts - Silver King KutLett SKK2 Instrucciones De Operación

OPERATING TIPS

* To achieve maximum performance and life, the KutLett will need to be lubricated from time to
time. See the accompanying diagram for areas that need lubrication. Use the lubricant supplied
with the KutLett. Do not use cooking or vegetable oil as these products will eventually
build up a residue and affect the performance of the KutLett.
* Do not use aerosol spray lubricants.
* Prior to cutting lettuce, be sure to remove the core with the Silver King Corer or you could
damage the Knife Assemblies.
* Use the KutLett only for its intended purpose - cutting lettuce.
* Inspect the KutLett before each use to make sure that there are no loose or missing parts.
STORAGE
When not in use, the KutLett should be stored with the Knife Assemblies covered to prevent them
from damage and for safety. To do this, simply release the spring tension by disengaging the
Springs (part no.s 10 & 11) from the Handle Lever Assembly (part no. 15) and lower the Handle
Lever Assembly all the way down to cover the Knife Assemblies. When you are ready to use the
KutLett again, raise the Handle Assembly to the upright position and engage the Springs.
When disengaging and engaging the springs, do so from the side of the KutLett so there is
no chance of your hands slipping into the Knife Assembly area. Do not place your hand
on the Knife Assemblies while disengaging the springs.
Store the KutLett in an area free from chemicals and solvents.

REPLACEMENT PARTS

Should the need arise, replacement parts are available through your local Silver King Dealer.
Refer to the enclosed Replacement Parts List when ordering parts. If you do not know your Silver
King Dealer, call Silver King at 1-763-553-1881 and we will direct you to them.
MODEL SERIAL NO. DATE INSTALLED
2
Searchable, web-optimized PDF created using a watermarked evaluation copy of CVISION Maestro