3.5 Overload and overheating protection
The power tool is equipped with an electronic system to protect against
overloading and overheating. The power tool switches itself off automatically
in the event of overloading or overheating. After releasing the control switch,
the power tool may not restart immediately when the switch is pressed again
(while the power tool is cooling down).
Overloading or overheating are not indicated by the charge status
display.
3.6 Adapter
This product has different adapters for various applications.
The following adapters are available:
Adapter
Description
Hex bit holder for bits with mechanical clamping mechanism.
Keyless chuck for sizes in the range:
1.5 mm ... 13 mm
(0.06 in ... 0.5 in)
Right-angle adapter for working in cramped conditions, with
magnetic hex bit holder.
Combinable with other adapters.
Eccentric adapter for working close to the wall, with magnetic
hex bit holder.
4
Technical data
4.1 SFE 2-A12
Rated voltage
Weight
Maximum speed
Maximum torque
Drill-bit diameter
*2236949*
Printed: 07.08.2019 | Doc-Nr: PUB / 5507951 / 000 / 00
1st gear
2nd gear
Screwdriving 0.5 Nm ... 5 Nm
Drilling
Softwood
2236949
10.8 V
1.1 kg
(2.4 lb)
400 /min
1,600 /min
(0.4 ftlb
... 4 ftlb
)
f
f
≤ 25 Nm
(≤ 18 ftlb
)
f
1.5 mm ... 13 mm
(0.06 in ... 0.5 in)
English
9