Setup; Bluetooth Setting; Setting The Bluetooth In Connection; General Setting - Alpine CDA-9886 Manual De Operación

SETUP

You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, General Setting, Display Setting, etc.,
can be modified.
Rotary encoder
SOURCE/
/ENT
BAND
F/SETUP
Use steps 1 to 5 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
1
Press and hold F/SETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select the desired item,
and then press /ENT.
1
Bluetooth * General
4
HD Radio * Bluetooth
(e.g. Select General)
1
* Displayed only when INT Mute is OFF and the mode is set to other
than Bluetooth Audio.
2
* Only when XM Radio is connected. For the XM Radio setting, refer to
"SAT Radio Receiver (Optional)" (page 22).
3
* Only when SIRIUS Radio is connected. For the XM Radio setting,
refer to "SAT Radio Receiver (Optional)" (page 22).
4
* Only when HD Radio is connected.
3
Turn the Rotary encoder to select a setting item,
and then press /ENT.
(e.g. Select AUX IN)
Bluetooth:
Bluetooth IN
General:
Birthday Set Clock Mode
Play Mode Beep INT Mute
7
*
AUX+ Name AUX IN GAIN
8
D.AUX Name * AUX IN
Changer Name Power IC
Birthday Set
Display:
Dimmer Dimmer Level
Font Select BGV Select
XM:
XM ADF
SIRIUS:
Game Alert
HD Radio:
Station Call Digital Seek
5
* Refer to "Setting the Time and Calendar" (page 8).
6
* Displayed only when Bluetooth IN is OFF.
7
* Displayed only when AUX+ is ON.
8
* Displayed only when Digital AUX is ON.
9
* Displayed only when AUX IN is ON.
/ESC
2 3
Display XM * /SIRIUS *
5
*
Clock Adjust Calendar
6
* AUX+ Setup
7
*
Digital AUX
9
AUX Name *
Language Set Demo
Scroll Type Text Scroll
Opening MSG Dimmer
Station Call
4
Turn the Rotary encoder to change the setting,
and then press /ENT.
(e.g. Select AUX IN ON or AUX IN OFF)
5
Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
• Pressing /ESC returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is canceled.

Bluetooth Setting

Select Bluetooth from the setup main menu in step2 above.
If an optional Bluetooth Box (KCE-300BT) is connected, you can place
a hands-free call by a Bluetooth- equipped mobile phone.
Make this setting when the Bluetooth Box (KCE-300BT) is connected
and the Bluetooth function is used. For details, refer to the Owner's
Manual of the optional Bluetooth Box (KCE-300BT).

Setting the Bluetooth IN Connection

Bluetooth IN ADAPTER / Bluetooth IN OFF (Initial Setting)
Set ADAPTER when the Bluetooth Box is connected.
• The PHONE/VOICE DIAL button can be used only when the
optional Bluetooth Box (KCE-300BT) is connected.

General Setting

General is selected on the setup main menu in step 2.

Birthday Opening Message Setting (Birthday Set)

mm/dd
By inputting your birthday details, a message can be displayed on that
day. Turn the Rotary encoder to set "mm" (Month), and then press
/ENT. Turn the Rotary encoder again to set "dd" (Date).

Setting the Clock Display (Clock Mode)

AM (Before noon) 12:00 (12-hour) (Initial setting) / 00:00 (24-hour)
You can select the clock display type, 12-hour or 24-hour, depending on
your preference.

Setting of Calendar Display Pattern Switching (Calendar)

dd/mm/yyyy / yyyy/mm/dd / mm/dd/yyyy (Initial setting)
You can switch the calendar display pattern to be shown when the time
is displayed.
yyyy : shows the year
mm : shows the month
dd : shows the day
ex. dd/mm/yyyy 25/12/2007

Playing MP3/WMA/AAC Data (Play Mode)

CD-DA (Initial setting) / CDDA&MP3/WMA
This unit can play back CDs containing both CD and MP3 /WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
Only the CD data in Session 1 can be played
CD-DA:
back.
CDDA&MP3/WMA: CD data, MP3/WMA/AAC files in mixed mode,
and multi-session discs can be played back.
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first. (If you use an MP3 changer, you have to
change discs.)
19
-EN