Setting The Auxiliary Data Field Display (Xm Only); Usb Memory (Optional); Controlling Usb Memory (Optional); Playing Mp3/Wma/Aac Files With The Usb Memory (Optional) - Alpine CDA-9886 Manual De Operación

Setting the Auxiliary Data Field Display
(XM only)
The XM Auxiliary Data Field (ADF) display can be switched on or off.
There is no ADF function for the SIRIUS receiver.
1
Press and hold F/SETUP for at least 2 seconds to
activate the SETUP selection mode.
2
Turn the Rotary encoder to select the XM mode,
and then press /ENT.
1
Bluetooth * General
4
*
HD Radio Bluetooth
1
* Displayed only when INT Mute is OFF and the mode is set to other
than Bluetooth Audio.
2
* Only when XM Radio is connected.
3
* Only when SIRIUS Radio is connected.
4
* Only when HD Radio is connected.
3
Press /ENT to activate the XM ADF mode.
4
Turn the Rotary encoder to select XM ADF ON/
OFF, and then press
When setting to ON, Auxiliary Data Field is displayed by
pressing VIEW (refer to the "Changing the Display" section
on page 25.).
5
Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
• Pressing /ESC returns to the previous SETUP mode.
• If no operation is performed for 60 seconds, SETUP is canceled.
26
-EN
2 3
Display XM * /SIRIUS *
/ENT.

USB memory (Optional)

/
SOURCE/

Controlling USB memory (Optional)

A USB memory device may be connected to this unit. With a USB
memory device connected to this unit, the audio files will be playable
from this unit.
• The controls on this unit for USB memory operation are operative
only when a USB memory is connected.
Playing MP3/WMA/AAC Files with the
USB memory (Optional)
If you connect a USB memory device containing MP3/WMA/AAC,
these files are playable on this unit.
1
Press SOURCE/ to switch to the USB mode.
1
TUNER XM/SIRIUS*
4
Bluetooth Audio* CHANGER*
1
* Only when XM Radio or SIRIUS Radio is connected.
2
* Displayed only when the iPod is connected and AUX+ Setup is set to
OFF, refer to "Setting the AUX+ Setup Mode" (page 20).
3
* Displayed only when the AUX+ Setup is set to ON, refer to "Setting
the AUX+ Setup Mode" (page 20).
4
* Displayed only when Bluetooth IN is set to ADAPTER, refer to
"Bluetooth Setting" (page 19).
5
* Only when the CD changer is connected.
2
To pause playback, press
Pressing / again will resume the playback.
• The root folder is displayed as "ROOT" in the Folder Name Search
mode.
• This unit plays back files in the USB memory with the same controls
and modes as playback of CDs containing MP3/WMA/AAC. For
details, refer to "CD/MP3/WMA/AAC" on pages 10 to 13.
• Before disconnecting USB memory, be sure to change to another
source or set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
2
DISC USB iPod* /AUX+*
5
TUNER
/ .
3