Battery Charging And Installation - Victure AC800 Manual De Instrucciones

Battery Charging and Installation

The battery and the camera are packaged separately, so please make sure
that the battery is charged with power, inserted into the camera before
getting the camera started.
Battery Charging:
The battery charging steps are as below:
1. Find the dual USB battery charger in the camera's accessories.
2. Connecting the charger with USB cable, you can charge it with power plug
or with computer. Charging with computer may be slower than using a power
adapter due to lower power output of computer USB ports.
3. Insert the two batteries into the charging compartment. When the charger
is on working, the red light means its charging, the blue light means it has
been fully charged.
Battery Installation:
After the batteries have been fully charged, please install one battery into the
camera to get the camera's power working. The battery installation steps are
as below:
1. Find the battery compartment part in the camera. Open the battery cover
as below picture shows. First, use your right thumb's fingernail to push the
switch into right as arrow 1 shows. Second, lift the battery cover with your left
thumb's fingernails as arrow 2 shows.
6