Settings Table - Victure AC800 Manual De Instrucciones

Settings Table

Camera Settings Page Explanation Table
※V＝Video Mode; P=Settings which effective under photo mode
Setting Value
Video 4K/2K/1080P/
Resolution 720P/480P/240P
Off/3 Minutes/
Loop
5 Minute/
Recording
10 Minutes
Gyroscope Off/On
WDR Off/On
Off /
0.1 Second/
Time-lapse 0.2 Seconds/
Record 0.5 Seconds/
1 Second/
5 Seconds
Motion
Off/On
detection
Audio
Off/On
Recording
V P Explanation
○ To set the video's resolution.
The file will be record by
○ segment based on the time
unit you've set.
This setting can counteract
○
the hand-shake and vibration's
effect to the recording.
Wide Dynamic Range
○
It can automatically adjust the
darkness in the image.
Time-lapse photography is a
technique whereby the freq-
uency at which film frames
are captured (the frame rate)
is much lower than that used
○ to view the sequence. When
played at normal speed, time
appears to be moving faster
and thus lapsing.
※This function can not be
used under 4K video resolution.
Under standby mode, the
camera will record and save
○
a 10 seconds video when it
detects a moving object.
It decides whether there is an
audio record into the video.
○
※ Use down button to turn on/
off the audio during recording.
11