Warranty Conditions; Troubleshooting - Sagola ATLANTA 800 G Manual De Instrucciones

This device has been manufactured with great precision and
has been subjected to a large number of controls before
leaving the factory.
The WARRANTY is valid for three years, counted as of the
date of purchase, which will be indicated by the seller in the
place provided for this purpose, together with his stamp.
Once the unit has been received, please complete the
warranty and send this to the manufacturer for validation.
This WARRANTY covers any manufacturing defect, which
will be repaired without charge. However, any malfunction
resulting from the incorrect use of the unit, such as
inadequate connections, breakage due to dropping, or similar,
the normal wear of components and in general any deficiency
not attributable to the manufacturer of the device, are
expressly excluded. Likewise, the WARRANTY shall be
rendered null and void when it is evident that the unit has
been handled by persons other than our Technical
Assistance Service.
Failure
The equipment does not
start up
The equipment does not
absorb product
The equipment sucks but
does not reach the
required pressure under
load
Abnormal vibration in the
output hose

19. WARRANTY CONDITIONS

20. TROUBLESHOOTING

Cause of the failure
Faulty power supply
The container of product for application is empty
The suction filter is clogged
The suction probe is loose, clogged or
punctured
The pressure regulator is at the minimum setting
The drain stopcock is closed
The suction valve is jammed, dirty or damaged
The anti-return valve is jammed, dirty or
damaged
The oil level in the housing is insufficient
The driving diaphragm is damaged
The hydraulic system is loose or faulty
The drain tube stopcock is open or damaged
Insufficient oil level
Anti-return valve is damaged or dirty
Suction hose or filter is damaged or dirty
The diaphragm is punctured or broken
Air bubbles in the hydraulic system
Anti-return valve is damaged or dirty
Anti-return valve joint is damaged
- 28 -
This WARRANTY does not support any undertaking made
by anyone outside our Technical Service.
In the case of any breakdown during the guarantee period,
please attach the completed warranty certificate to the unit
and deliver this to the nearest Technical Assistance Service
or get in touch with the factory.
Any demand of greater importance against the supplier, in
particular compensation for damages, is excluded. This is
also applicable to any damages that might arise during
counselling, while acquiring practice and during
demonstration.
Consequently, the services rendered under guarantee do
not involve an extension of the warranty period.
Any device for which there is no duly completed guarantee
certificate in the files of SAGOLA S.A. will be rejected.
The manufacturer reserves the right to make technical
modifications.
Repair
Eliminate pressure in the unit following the
descompression procedure described on manual
Re-fill the container
Clean or replace
Check or replace the suction probe
attachment bolt
Adjust th epressure regulator
Open the stopcock
Release the suction valve and clean or
replace
Release anti-return valve and clean or
replace
Replenish the housing with oil to the level
indicated on the diptick
Replace the diaphragm
Disassemble as indicated in the appropriate
section and check the piston, sleeve and
hydraulic connections
Close the stopcock or replace
Replenish
Clean or replace the valve
Clean or replace the valve
Replace the diaphragm
Adjust th eproduct regulator (Maximum
-Minimum) to eliminate the air bubbles
Clean or replace the valve
Replace the joint