7. Press the SET button. The "SNOOZE time" (period
between two alarm repeats) flashes. Default setting:
05 (= 5 minutes).
8. Set the desired SNOOZE time with UP or DOWN.
9. Repeat the process - depending on the selected setting
- for alarm 2 if necessary.
10. Slide the SET switch to LOCK.
11. Activate the desired alarm time with the SET button:
−
: Alarm time 1 is active
1
−
: Alarm time 2 is active
2
−
and
1
Being awakened
At the set time you will be woken by an alarm signal, which will
become more intense as the waking time increases.
Interrupting the alarm for 24 hours
− Press any button (except SNOOZE/LIGHT) to interrupt the
alarm. After 24 hours, the alarm will be triggered again.
DCF Radio-controlled alarm clock CK 1701
: Alarm times 1 and 2 are active
2
47