Frequently Asked Questions - Marmitek BOOMBOOM 55 Modo De Empleo

FREQUENTLY ASKED QUESTIONS

I am unable to pair my BoomBoom 55.
Please check the following:
1. Please ensure that the BoomBoom 55 is powered and press
the pairing button twice.
2. Ensure that your headphones are in pairing mode (refer to
your headphones' user manual).
3. Ensure that the distance between your headphones and the
BoomBoom 55 is not too large and there are no major
obstacles between them.
4. To ensure the widest possible range, make sure your
BoomBoom 55 is within line of sight and the internal antenna
is not positioned near large metal objects.
My BoomBoom 55 is paired, but I don't hear anything.
1. Ensure that the blue LED on the Boom Boom 60 lights up
continuously.
2. Ensure that the audio cable is properly connected.
3. Ensure that the BoomBoom 55 is connected to the correct
audio output.
4. Ensure that the volume of your audio source is set to a
comfortable listening level.
5. Ensure that the BoomBoom 55 is paired with the correct
headphones.
6. Put the BoomBoom 55 and your Bluetooth receiver in pairing
mode again.
I am unable to automatically connect to my headphones.
If you no longer automatically establish a connection with your
headphones, press the pairing button twice (the BoomBoom 55
then goes into pairing mode) and put the headset in pairing mode.
I can't pair a second Bluetooth device.
In order to use this feature, both Bluetooth devices should have
Bluetooth version 3.0 or later.
8 © MARMITEK