Operating The Fan - HAMPTON BAY 52371 Guía De Uso Y Cuidado

Operating Your Fan and Remote Control
Remote Control - Your fan is equipped with a remote control to operate
the speed and lights of your new ceiling fan. For more information
on how to install the remote control, see the remote control instruction
along with the remote control components.
Speed setting for warm or cool weather depends on factor such as the
room size, ceiling height, number of fans and so on.
The fan shipped from the factory with the reversing switch positioned
to circulate air downward. If airow is desired in the opposite direction,
turn your fan off and wait for the blades to stop turning, then slide the
reversing switch (located in switch cup) to opposite position, and turn
fan on again. The fan blades will turn in the opposite direction and
reverse airfow.
1. Speed - The remote features Low, Med, Hi and Off buttons to select
the desired speed of operation and turn the fan On or Off.
2. Light - To control the light kit, the remote features a Light/Dimmer
button.
NOTE: Wait for fan to stop before reversing the direction of blade rotation.
Warm weather - (Forward) A downward airflow creates a cooling effect.
This allows you to set your air conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward air ow moves warm air off the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.

Operating the fan

High button = High speed
Medium button = Medium speed
Low button = Low speed
Off button = Power off
Light/Dimmer button = Dims light with memory