Assembly - Attaching The Fan Blades; Attaching The Blades To The Blade Brackets - HAMPTON BAY 52371 Guía De Uso Y Cuidado

Assembly - Attaching the Fan Blades

10
Attaching the blades to the blade
brackets
□
Attach a blade (F) to a blade bracket (G) by inserting screws
(AA) into the holes in the blade and through the blade
bracket. Note that the rubber washers are preattached to
the blade bracket.
□
Tighten each screw securely.
□
Repeat these steps for each blade (F) and blade bracket (G).
AA
F
G
11
Fastening the blade assemblies to
the motor
□
Fasten the blade assembly to the motor (D) by inserting the
alignment post into the slot on the bottom of the motor and
tightening the blade bracket (G) screws. The blade bracket
screws are pre-installed into the blade bracket (G).
□
Repeat this step for the remaining blade assemblies.
11
Please contact 1-877-527-0313 for further assistance.
D
G
HAMPTONBAY.COM